My Blog

Posts for tag: dental implants

ImplantsCanProvideEffectiveOptionsforTotalToothReplacement

Losing all your teeth can dramatically impact your life for the worst. Fortunately, we can give you your "teeth" back. The most common way, at least until a few decades ago, is with custom dentures, which reasonably restore life-like appearance and dental function. But it does have one major drawback—it can't stop bone loss.

Loss of bone in the jaws often occurs with missing teeth. Normally, the bone continuously generates newer cells to replace older ones that have died. Chewing stimulates this growth as the force generated travels up through the teeth to the bone. But when teeth go missing, new bone growth slows, eventually causing the bone's volume and density to decrease.

Dentures can't reactivate this lost stimulation, and so bone loss may continue. Dentures even accelerate this loss as the compressive forces applied to the bony ridge are detrimental. This often leads to a "loosening" of a denture's fit that can make them uncomfortable and less secure to wear.

Today, however, patients with total tooth loss have another option that could alleviate the problem of bone loss—dental implants. Since their inception forty years ago, implants have become the preferred method of both dentists and patients for tooth replacement.

Implants consist of a titanium metal post that's surgically imbedded into the jawbone. Bone cells are attracted to this particular metal, readily multiplying and adhering to the implant's titanium surface. Because of this, an implant can slow or even stop bone loss.

Most people are familiar with the single tooth implant with an attached lifelike crown. Although this use of implants could be used to restore total tooth loss, it can be quite costly replacing over two dozen teeth individually.

But implants could still be part of the answer for someone with complete tooth loss, because they can also be used to support traditional restorations. A few implants strategically placed around the jaw can support either a removable denture or a fixed bridge.

Besides being a cost-effective way to add support to these traditional tooth replacements, the inclusion of implants will likely decrease continuing bone loss. Most importantly, it can give you back your dental function—and your smile to boot.

If you would like more information on dental implant options, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “New Teeth in One Day.”

HowLongIstheImplantProcessItDependsonYourBoneHealth

If you're thinking about getting dental implants, you may be curious about how long it might take. The answer depends on the health of your supporting bone.

Bone is an integral part of implant functionality as bone cells gradually grow and adhere to the newly placed implant to give it its characteristic strength. The implant also requires an adequate amount of bone to accurately position it for the best appearance outcome.

If the bone is sufficient and healthy, we can proceed with the surgical placement of the implant. The most common practice following surgery is to allow a few weeks for the bone integration described previously to take place before finally attaching the crown. With an alternative known as a “tooth in one day” procedure, we install a crown right after surgery, which gives you a full smile when you leave.

There's one caveat to this latter method, though—because the implant still requires bone integration, this immediate crown is temporary. It's designed to receive no pressure from biting or chewing, which could damage the still integrating implant. We'll install the permanent crown after the implant and bone have had time to fully mesh.

So, if your supporting bone is sound, the complete implant process may only take a few weeks. But what if it's not—what if you've lost bone and don't have enough to support an implant? In that case, the length of process time depends on the severity of the bone loss and if we're able to overcome it. In some cases, we can't, which means we'll need to consider a different restoration.

But it's often possible to regenerate lost bone by grafting bone material at the implant site. If the bone loss is moderate, it may take 2 to 4 months of regrowth after grafting before we can perform implant surgery. If it's more significant or there's disease damage to the socket, it may take longer, usually 4 to 6 months. It largely depends on the rate of bone regeneration.

In a nutshell, then, the health of your jaw's supporting bone has a lot to do with whether the implant process will take a few weeks or a few months. Regardless of the time, though, you'll gain the same result—new, functional teeth and a more attractive smile.

If you would like more information on dental implant restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Implant Timelines for Replacing Missing Teeth.”

DentalImplantsAreEvenMoreAdvancedThanksToTheseOtherTechnologies

When dental implants hit the scene in the 1980s, they revolutionized the field of dental restorations. But as groundbreaking as they were then, they're even more advanced now.

Some of the advancements have to do with improvements in implant design and manufacturing. Implant sizes and shapes were once quite limited, but today they come in a variety of forms to better match the types of teeth they replace.

But there has also been important progress in complementary technologies that help us realize better outcomes. Many of these other advances have had a positive impact on the planning and surgical stages of implant installation.

CT/CBCT scanning. For the best outcome, it's critical to install an implant at the most appropriate location on the jaw. This can be difficult to determine, however, because of the location of oral and facial structures like nerves or sinuses that might interfere with implant placement. But using a type of computer tomography (CT) scanning called cone beam CT, we can produce a 3-D computer graphic image that helps us navigate possible obstructions as we pinpoint the ideal location for an implant.

Digital smile displays. We're now able to produce digital models of the mouth, which can assist with more than implant placement—we can also use them to visualize what a new smile with implants will look like before we install them. This is especially helpful in situations where only a few teeth need to be replaced: We want to ensure that the new implant crowns blend seamlessly with the remaining teeth for the most natural appearance.

Custom-made surgical guides. We've been using surgical guides to mark the exact drilling locations during implant surgery for many years. But 3-D printing technology can now help us produce surgical guides that are even more useful and precise. Using a 3-D printer, we can produce oral devices based on the patient's individual dental dimensions captured through digital scanning. That produces a better fit for the guide on the teeth and more accurate implant placement.

Together, these and other technological advances are helping us achieve even more successful results. Not only can they help us produce implant outcomes that can last for years or even decades, but also the most beautiful smiles possible.

If you would like more information on dental implant restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “How Technology Aids Dental Implant Therapy.”

By Pondfield Dental, PC
November 25, 2020
Category: Dental Procedures
Tags: dental implants  
ImplantsCanMakeItEasiertoRestoreMissingTeethinStages

A fair number of people with total tooth loss have arrived at this point after a long history of dental issues. It's quite likely they've had a series of bridges or partial dentures over the years to accommodate lost teeth at various times before moving to full dentures.

For many, it often seems easier to extract any remaining teeth at some point and simply move on to a total restoration. It's often better for oral health, however, to preserve any remaining teeth for as long as possible and update restorations as needed. Dental implants could make this type of staged restoration strategy much easier to manage.

Implants are tiny metal posts surgically imbedded in a patient's jawbone. Over time, bone cells grow and adhere to the implant's titanium surface, creating a strong and durable hold. Its most familiar application is as a replacement for an individual tooth.

But because of their strength and durability, this advanced dental technology is also used to support other restorations like bridges and partial or full dentures by way of a few strategically placed implants. And it's in that role that they can be useful in planning and implementing future restoration upgrades when needed.

Under this strategy, we add implants to supplement pre-existing implants from earlier restorations to support the updated dental work. For example, we might have previously placed an implant supporting a single tooth or a small bridge. When the need later arises for a partial denture, we can add additional implants to be used with the earlier one to support the new denture.

If the earlier implants have been well-placed, we need only to add enough implants necessary to support a full denture when the time comes. How many will depend on the particular type of denture: A removable lower denture may only require one additional implant with one already in place. A fixed upper or lower denture will require enough to bring the number to between four and eight.

Taking this long-term approach can be more cost-effective in the long-run. More importantly, it can make for a smoother path for the patient and help preserve remaining teeth for as long as possible.

If you would like more information on restoration options for lost teeth, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Replacing All Teeth but Not All at Once.”

By Pondfield Dental, PC
April 29, 2020
Category: Dental Procedures
Tags: dental implants   dentures  
Implant-SupportedDenturesCouldImproveYourBoneHealth

Generations have depended on dentures to effectively and affordably replace lost teeth. But they do have a major weakness: They contribute to jawbone loss that creates not only mouth and facial problems, but can also ruin a denture’s fit.

Bone loss is a normal consequence of losing teeth. The biting forces normally generated when we chew stimulate new bone to replace older bone. When a tooth is missing, however, so is that chewing stimulation. This can slow bone replacement growth and gradually decrease the density and volume of affected bone.

While dentures can restore dental appearance and function, they can’t restore this growth stimulation. What’s worse, the pressure of the dentures against the gum-covered jaw ridge they rest upon may irritate the underlying bone and accelerate loss.

But there is a solution to the problem of denture-related bone loss: an implant-supported denture. Rather than obtaining its major support from the gum ridges, this new type of denture is secured by strategically-placed implants that connect with it.

Besides the enhanced support they can provide to a denture restoration, implants can also deter bone loss. This is because of the special affinity bone cells have with an implant’s imbedded titanium post. The gradual growth of bone on and around the implant surface not only boosts the implant’s strength and durability, it can also improve bone health.

There are two types of implant-supported dentures. One is a removable appliance that connects with implants installed in the jaw (three or more for the upper jaw or as few as two in the lower). It may also be possible to retrofit existing dentures to connect with implants.

The other type is a fixed appliance a dentist permanently installs by screwing it into anywhere from four and six implants. The fixed implant-supported denture is closer to the feel of real teeth (you’ll brush and floss normally), but it’s usually more costly than the removable implant-supported denture.

While more expensive than traditional ones, implant-supported dentures still cost less than other restorations like individual implant tooth replacements. They may also help deter bone loss, which may lead to a longer lasting fit with the dentures. Visit your dentist for an evaluation of your dental condition to see if you’re a good candidate for this advanced form of dental restoration.

If you would like more information on implant-supported dentures, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Overdentures & Fixed Dentures.”